dougnliz Posted July 11, 2014 Share Posted July 11, 2014 Unsure if this will be of any help, but I resolved my stuck message issue by using sensei73's nzbdrone docker. I was attempting to add a downloader, but the test never passed and the message in the bottom wouldn't go away without Xing out of it. Log showed a connection issue, but nothing that clearly showed why. I never noticed the exact problem dougnliz describes, mainly due to never getting past the Sab connection issue. https://registry.hub.docker.com/u/sensei73/nzbdrone/ Here are the docker run commands I used, just change out sensei73 for needo and you'll have the same command I was using (used gfjardim plugin for this): The message no longer gets stuck and I can actually connect to Sabnzbd now using the same API key, same Host, same Port and same category as attempted with needos. I'll eventually dive into docker's more, as I want to learn the creation process, but hopefully this will help someone find the issue by comparing the differences. sensei73's is on NzbDrone Ver. 2.0.0.1632, which I believe needo was using as well. The difference between his docker and mine is that mine runs as nobody so the little popups do not go away. However it does not in any way affect connectivity to sabnzbd, plex, etc. The little test popup just doesn't go away. Thank you. Are you still working with the nzbdrone devs on this issue? I had posted on their forum and they said you were. It would be nice to get that fixed. It's rather annoying. Also thanks very much for all the work on these Dockers. I'm using 3 of yours so far and they all work great. Keep up the good work. Doug Quote Link to comment
needo Posted July 11, 2014 Author Share Posted July 11, 2014 Are you still working with the nzbdrone devs on this issue? I had posted on their forum and they said you were. It would be nice to get that fixed. It's rather annoying. Also thanks very much for all the work on these Dockers. I'm using 3 of yours so far and they all work great. Keep up the good work. Yes I am. Trying to trace down a specific error message to give to them. Quote Link to comment
Sensei73 Posted July 12, 2014 Share Posted July 12, 2014 just to clarify, I made this docker for my own use, the only difference with the version of needo, is nzbdrone is running as ROOT. IF you're looking for support you should use needo's one. Right now I'm trying to make a spotweb pluging using needo's mariadb, it's not working correctly for the time being, but when finish, I will tell need, if he support it, to add to his own repository. It's better to centralize all docker based on the same image to not multiply VMs. thanks (needo, it's not an attempt to hijack your tread). Quote Link to comment
Markyb0y Posted July 14, 2014 Share Posted July 14, 2014 sorry, but still not working Please try again. I posted an additional fix. still the same I am afraid..... though maybe a little more info? Command: root@localhost:# /usr/bin/docker logs NZBMegaSearch *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... No SSH host key available. Generating one... Creating SSH2 RSA key; this may take some time ... Creating SSH2 DSA key; this may take some time ... Creating SSH2 ECDSA key; this may take some time ... Creating SSH2 ED25519 key; this may take some time ... invoke-rc.d: policy-rc.d denied execution of restart. *** Running /etc/my_init.d/edge.sh... Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: git-man liberror-perl patch rsync Suggested packages: gettext-base git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb git-arch git-bzr git-cvs git-mediawiki git-svn ed diffutils-doc The following NEW packages will be installed: git git-man liberror-perl patch rsync 0 upgraded, 5 newly installed, 0 to remove and 7 not upgraded. Need to get 3642 kB of archives. After this operation, 22.5 MB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ trusty-updates/main rsync amd64 3.1.0-2ubuntu0.1 [283 kB] Get:2 http://archive.ubuntu.com/ubuntu/ trusty/main liberror-perl all 0.17-1.1 [21.1 kB] Get:3 http://archive.ubuntu.com/ubuntu/ trusty/main git-man all 1:1.9.1-1 [698 kB] Get:4 http://archive.ubuntu.com/ubuntu/ trusty/main git amd64 1:1.9.1-1 [2555 kB] Get:5 http://archive.ubuntu.com/ubuntu/ trusty-updates/main patch amd64 2.7.1-4ubuntu1 [84.4 kB] Fetched 3642 kB in 1s (1852 kB/s) Selecting previously unselected package rsync. (Reading database ... 16116 files and directories currently installed.) Preparing to unpack .../rsync_3.1.0-2ubuntu0.1_amd64.deb ... Unpacking rsync (3.1.0-2ubuntu0.1) ... Selecting previously unselected package liberror-perl. Preparing to unpack .../liberror-perl_0.17-1.1_all.deb ... Unpacking liberror-perl (0.17-1.1) ... Selecting previously unselected package git-man. Preparing to unpack .../git-man_1%3a1.9.1-1_all.deb ... Unpacking git-man (1:1.9.1-1) ... Selecting previously unselected package git. Preparing to unpack .../git_1%3a1.9.1-1_amd64.deb ... Unpacking git (1:1.9.1-1) ... Selecting previously unselected package patch. Preparing to unpack .../patch_2.7.1-4ubuntu1_amd64.deb ... Unpacking patch (2.7.1-4ubuntu1) ... Processing triggers for ureadahead (0.100.0-16) ... Setting up rsync (3.1.0-2ubuntu0.1) ... Removing any system startup links for /etc/init.d/rsync ... update-rc.d: warning: default stop runlevel arguments (0 1 6) do not match rsync Default-Stop values (none) Adding system startup for /etc/init.d/rsync ... /etc/rc0.d/K20rsync -> ../init.d/rsync /etc/rc1.d/K20rsync -> ../init.d/rsync /etc/rc6.d/K20rsync -> ../init.d/rsync /etc/rc2.d/S20rsync -> ../init.d/rsync /etc/rc3.d/S20rsync -> ../init.d/rsync /etc/rc4.d/S20rsync -> ../init.d/rsync /etc/rc5.d/S20rsync -> ../init.d/rsync invoke-rc.d: policy-rc.d denied execution of restart. Setting up liberror-perl (0.17-1.1) ... Setting up git-man (1:1.9.1-1) ... Setting up git (1:1.9.1-1) ... Setting up patch (2.7.1-4ubuntu1) ... Processing triggers for ureadahead (0.100.0-16) ... fatal: destination path '/opt' already exists and is not an empty directory. ln: failed to create symbolic link '/opt/NZBmegasearch/custom_params.ini': No such file or directory chown: cannot access '/opt/NZBmegasearch': No such file or directory *** /etc/my_init.d/edge.sh failed with status 1 *** Killing all processes... The command finished successfully! Quote Link to comment
Neo_x Posted July 14, 2014 Share Posted July 14, 2014 Hi Needo / Guys firstly - Thank you for your dedicated effort on this - If a point and click solution becomes available for unraid, i am quite sure that many customers will be smiling all the way to the bank *Hint for Tom - Please buy everybody a beer* Can i bug you to add one more App/Docker which i am using on a daily basis? Its called Moviegrabber. I ended up trusting it much more than Couch potato, and have been performing very solidly for me the past few years. Basically its an RSS scanner on both NZB and torrent, looking for new movie releases based on your criteria, and then releases them to black hole folders of your choice( Or Que them for you to pick from and manually release) Link to the Forum / App / Download links : https://forums.sabnzbd.org/viewtopic.php?t=8569 Binhex is active on Unraid forums too, and should be able to help where needed thx again Neo_x Quote Link to comment
binhex Posted July 14, 2014 Share Posted July 14, 2014 hi neo_x, you really should of done a search on the docker hub :-), https://registry.hub.docker.com/ - hint type moviegrabber :-) disclaimer - not 100% happy with this docker image right now, as arch linux as a base os is pretty big, if you get any probs then pm me. Quote Link to comment
Neo_x Posted July 14, 2014 Share Posted July 14, 2014 hi neo_x, you really should of done a search on the docker hub :-), https://registry.hub.docker.com/ - hint type moviegrabber :-) disclaimer - not 100% happy with this docker image right now, as arch linux as a base os is pretty big, if you get any probs then pm me. *doh* *note to self Monday mornings always requires a double dose of coffee Quote Link to comment
needo Posted July 14, 2014 Author Share Posted July 14, 2014 sorry, but still not working Please try again. I posted an additional fix. still the same I am afraid..... though maybe a little more info? Command: root@localhost:# /usr/bin/docker logs NZBMegaSearch *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... No SSH host key available. Generating one... Creating SSH2 RSA key; this may take some time ... Creating SSH2 DSA key; this may take some time ... Creating SSH2 ECDSA key; this may take some time ... Creating SSH2 ED25519 key; this may take some time ... invoke-rc.d: policy-rc.d denied execution of restart. *** Running /etc/my_init.d/edge.sh... Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: git-man liberror-perl patch rsync Suggested packages: gettext-base git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb git-arch git-bzr git-cvs git-mediawiki git-svn ed diffutils-doc The following NEW packages will be installed: git git-man liberror-perl patch rsync 0 upgraded, 5 newly installed, 0 to remove and 7 not upgraded. Need to get 3642 kB of archives. After this operation, 22.5 MB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ trusty-updates/main rsync amd64 3.1.0-2ubuntu0.1 [283 kB] Get:2 http://archive.ubuntu.com/ubuntu/ trusty/main liberror-perl all 0.17-1.1 [21.1 kB] Get:3 http://archive.ubuntu.com/ubuntu/ trusty/main git-man all 1:1.9.1-1 [698 kB] Get:4 http://archive.ubuntu.com/ubuntu/ trusty/main git amd64 1:1.9.1-1 [2555 kB] Get:5 http://archive.ubuntu.com/ubuntu/ trusty-updates/main patch amd64 2.7.1-4ubuntu1 [84.4 kB] Fetched 3642 kB in 1s (1852 kB/s) Selecting previously unselected package rsync. (Reading database ... 16116 files and directories currently installed.) Preparing to unpack .../rsync_3.1.0-2ubuntu0.1_amd64.deb ... Unpacking rsync (3.1.0-2ubuntu0.1) ... Selecting previously unselected package liberror-perl. Preparing to unpack .../liberror-perl_0.17-1.1_all.deb ... Unpacking liberror-perl (0.17-1.1) ... Selecting previously unselected package git-man. Preparing to unpack .../git-man_1%3a1.9.1-1_all.deb ... Unpacking git-man (1:1.9.1-1) ... Selecting previously unselected package git. Preparing to unpack .../git_1%3a1.9.1-1_amd64.deb ... Unpacking git (1:1.9.1-1) ... Selecting previously unselected package patch. Preparing to unpack .../patch_2.7.1-4ubuntu1_amd64.deb ... Unpacking patch (2.7.1-4ubuntu1) ... Processing triggers for ureadahead (0.100.0-16) ... Setting up rsync (3.1.0-2ubuntu0.1) ... Removing any system startup links for /etc/init.d/rsync ... update-rc.d: warning: default stop runlevel arguments (0 1 6) do not match rsync Default-Stop values (none) Adding system startup for /etc/init.d/rsync ... /etc/rc0.d/K20rsync -> ../init.d/rsync /etc/rc1.d/K20rsync -> ../init.d/rsync /etc/rc6.d/K20rsync -> ../init.d/rsync /etc/rc2.d/S20rsync -> ../init.d/rsync /etc/rc3.d/S20rsync -> ../init.d/rsync /etc/rc4.d/S20rsync -> ../init.d/rsync /etc/rc5.d/S20rsync -> ../init.d/rsync invoke-rc.d: policy-rc.d denied execution of restart. Setting up liberror-perl (0.17-1.1) ... Setting up git-man (1:1.9.1-1) ... Setting up git (1:1.9.1-1) ... Setting up patch (2.7.1-4ubuntu1) ... Processing triggers for ureadahead (0.100.0-16) ... fatal: destination path '/opt' already exists and is not an empty directory. ln: failed to create symbolic link '/opt/NZBmegasearch/custom_params.ini': No such file or directory chown: cannot access '/opt/NZBmegasearch': No such file or directory *** /etc/my_init.d/edge.sh failed with status 1 *** Killing all processes... The command finished successfully! Try it without EDGE. Quote Link to comment
dalben Posted July 14, 2014 Share Posted July 14, 2014 Thats the beauty of Docker as I see it. Most likely someone has already tried to do what you want and it can work straight away. The XBMC Server docker is a prime example. Quote Link to comment
Markyb0y Posted July 14, 2014 Share Posted July 14, 2014 sorry, but still not working Please try again. I posted an additional fix. still the same I am afraid..... though maybe a little more info? Command: root@localhost:# /usr/bin/docker logs NZBMegaSearch *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... No SSH host key available. Generating one... Creating SSH2 RSA key; this may take some time ... Creating SSH2 DSA key; this may take some time ... Creating SSH2 ECDSA key; this may take some time ... Creating SSH2 ED25519 key; this may take some time ... invoke-rc.d: policy-rc.d denied execution of restart. *** Running /etc/my_init.d/edge.sh... Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: git-man liberror-perl patch rsync Suggested packages: gettext-base git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb git-arch git-bzr git-cvs git-mediawiki git-svn ed diffutils-doc The following NEW packages will be installed: git git-man liberror-perl patch rsync 0 upgraded, 5 newly installed, 0 to remove and 7 not upgraded. Need to get 3642 kB of archives. After this operation, 22.5 MB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ trusty-updates/main rsync amd64 3.1.0-2ubuntu0.1 [283 kB] Get:2 http://archive.ubuntu.com/ubuntu/ trusty/main liberror-perl all 0.17-1.1 [21.1 kB] Get:3 http://archive.ubuntu.com/ubuntu/ trusty/main git-man all 1:1.9.1-1 [698 kB] Get:4 http://archive.ubuntu.com/ubuntu/ trusty/main git amd64 1:1.9.1-1 [2555 kB] Get:5 http://archive.ubuntu.com/ubuntu/ trusty-updates/main patch amd64 2.7.1-4ubuntu1 [84.4 kB] Fetched 3642 kB in 1s (1852 kB/s) Selecting previously unselected package rsync. (Reading database ... 16116 files and directories currently installed.) Preparing to unpack .../rsync_3.1.0-2ubuntu0.1_amd64.deb ... Unpacking rsync (3.1.0-2ubuntu0.1) ... Selecting previously unselected package liberror-perl. Preparing to unpack .../liberror-perl_0.17-1.1_all.deb ... Unpacking liberror-perl (0.17-1.1) ... Selecting previously unselected package git-man. Preparing to unpack .../git-man_1%3a1.9.1-1_all.deb ... Unpacking git-man (1:1.9.1-1) ... Selecting previously unselected package git. Preparing to unpack .../git_1%3a1.9.1-1_amd64.deb ... Unpacking git (1:1.9.1-1) ... Selecting previously unselected package patch. Preparing to unpack .../patch_2.7.1-4ubuntu1_amd64.deb ... Unpacking patch (2.7.1-4ubuntu1) ... Processing triggers for ureadahead (0.100.0-16) ... Setting up rsync (3.1.0-2ubuntu0.1) ... Removing any system startup links for /etc/init.d/rsync ... update-rc.d: warning: default stop runlevel arguments (0 1 6) do not match rsync Default-Stop values (none) Adding system startup for /etc/init.d/rsync ... /etc/rc0.d/K20rsync -> ../init.d/rsync /etc/rc1.d/K20rsync -> ../init.d/rsync /etc/rc6.d/K20rsync -> ../init.d/rsync /etc/rc2.d/S20rsync -> ../init.d/rsync /etc/rc3.d/S20rsync -> ../init.d/rsync /etc/rc4.d/S20rsync -> ../init.d/rsync /etc/rc5.d/S20rsync -> ../init.d/rsync invoke-rc.d: policy-rc.d denied execution of restart. Setting up liberror-perl (0.17-1.1) ... Setting up git-man (1:1.9.1-1) ... Setting up git (1:1.9.1-1) ... Setting up patch (2.7.1-4ubuntu1) ... Processing triggers for ureadahead (0.100.0-16) ... fatal: destination path '/opt' already exists and is not an empty directory. ln: failed to create symbolic link '/opt/NZBmegasearch/custom_params.ini': No such file or directory chown: cannot access '/opt/NZBmegasearch': No such file or directory *** /etc/my_init.d/edge.sh failed with status 1 *** Killing all processes... The command finished successfully! Try it without EDGE. it now finally works, thanks for the effort Quote Link to comment
Pducharme Posted July 15, 2014 Share Posted July 15, 2014 needo : Any idea on doing a Docker for CrushFTP ? This is exactly what I'm looking for, but i'm not good enough to understand how docker works... Thanks! Quote Link to comment
dalben Posted July 15, 2014 Share Posted July 15, 2014 CrushFTP is a licenced product. Unless someone already owns it I can't see many jumping to work on a commercial package. Quote Link to comment
danivlopes Posted July 15, 2014 Share Posted July 15, 2014 A Docker for Subliminal or Periscope would also be nice: http://bitcube.bitbucket.org/ https://code.google.com/p/periscope/ Quote Link to comment
Pducharme Posted July 15, 2014 Share Posted July 15, 2014 CrushFTP is a licenced product. Unless someone already owns it I can't see many jumping to work on a commercial package. Yes I know that, but it the docker give the possibility to add your own licence, it would be nice. I just need a FTP with more customisation. I came from a basic QNAP NAS and they had the possibility to create users for the FTP, put Quotas, and the real feature I need, the Throttling so my limited 10Mbps upload is not took all by FTP. Quote Link to comment
eroz Posted July 15, 2014 Share Posted July 15, 2014 let's stop cluttering needo's support thread. Requests for dockers should be made to the correct thread, http://lime-technology.com/forum/index.php?topic=33920.0 Quote Link to comment
NAS Posted July 15, 2014 Share Posted July 15, 2014 nzbget 13 stable released http://nzbget.net/forum/viewtopic.php?f=4&t=1306 I doubt this will ever make 14.04 trusty so wont make phusion. Thoughts? Quote Link to comment
needo Posted July 15, 2014 Author Share Posted July 15, 2014 nzbget 13 stable released http://nzbget.net/forum/viewtopic.php?f=4&t=1306 I doubt this will ever make 14.04 trusty so wont make phusion. Thoughts? I can compile a Debian package for this, but will not be able to work on it for a day or so. Or if it gets put into Ubuntu unstable. Quote Link to comment
NAS Posted July 15, 2014 Share Posted July 15, 2014 Hang fire. I dont think there is a need to jump on this and it is a good test case for how to handle these things with phusion. Quote Link to comment
botez Posted July 15, 2014 Share Posted July 15, 2014 I saw others were using gfjardim/transmission container with success. However, when I start the container transmission does not start. The logs simply say: CRIT Supervisor running as root (no user in config file) Any ideas on this? I'm running it as: docker run -d -p 9091:9091 --name=transmission -v /mnt/cache/appdata/transmission:/config -v /mnt:/mnt -v /etc/localtime:/etc/localtime:ro gfjardim/transmission Quote Link to comment
nacat78 Posted July 15, 2014 Share Posted July 15, 2014 I saw others were using gfjardim/transmission container with success. However, when I start the container transmission does not start. The logs simply say: CRIT Supervisor running as root (no user in config file) Any ideas on this? I'm running it as: docker run -d -p 9091:9091 --name=transmission -v /mnt/cache/appdata/transmission:/config -v /mnt:/mnt -v /etc/localtime:/etc/localtime:ro gfjardim/transmission Here's how I got it to work - below is the xml i am using - after the base image is downloaded and container is built - stop transmission container - go to your install/config folder to edit settings.json file and edit the username and password for your setup, then restart container. Transmission XML: <?xml version="1.0" encoding="utf-8"?> <Container> <Name>Transmission</Name> <Repository>gfjardim/transmission</Repository> <BindTime>true</BindTime> <Privileged>false</Privileged> <Environment> <Variable> <Name></Name> <Value></Value> </Variable> </Environment> <Networking> <Mode>bridge</Mode> <Publish> <Port> <HostPort>9091</HostPort> <ContainerPort>9091</ContainerPort> <Protocol>tcp</Protocol> </Port> </Publish> </Networking> <Data> <Volume> <HostDir>/mnt/cache/apps/transmission/</HostDir> <ContainerDir>/config</ContainerDir> <Mode>rw</Mode> </Volume> <Volume> <HostDir>/mnt/user/_unsorted/</HostDir> <ContainerDir>/downloads</ContainerDir> <Mode>rw</Mode> </Volume> </Data> </Container> portion of settings.json file "rpc-enabled": true, "rpc-password": "*******", "rpc-port": 9091, "rpc-url": "/transmission/", "rpc-username": "*******", "rpc-whitelist": "127.0.0.1", "rpc-whitelist-enabled": false, @ needo - didn't mean to clutter your thread, btw thanks for your work on these docker containers. Quote Link to comment
Markyb0y Posted July 16, 2014 Share Posted July 16, 2014 Docker Plex Media Server since moving to a dockerized version I now do not get my library updated when new shows or movies are added to the directories is this just me or are others seeing the same behaviour? Quote Link to comment
JM2005 Posted July 16, 2014 Share Posted July 16, 2014 Mine is working fine. Be sure you set Plex to update folder changes when a file is added in the settings and what do you have your check time set too? Quote Link to comment
archedraft Posted July 16, 2014 Share Posted July 16, 2014 I recently installed Deulge and once is it installed unRAID gives the following errors: Jul 16 14:03:48 Tower emhttp: read_line: read_line: input line too long Jul 16 14:04:23 Tower last message repeated 15 times Jul 16 14:04:27 Tower last message repeated 7 times Once this happens I lose the option to connect to the unRAID Gui via http://Tower. I have to enter the IP address (192.168.1.20) to pull up the unRAID web Gui. This also happens if I install the Deluge_64.plg so it would appear that this is not a docker problem but I was hoping that some else here was running into similar issues? Quote Link to comment
NAS Posted July 17, 2014 Share Posted July 17, 2014 I recently installed Deulge and once is it installed unRAID gives the following errors: Jul 16 14:03:48 Tower emhttp: read_line: read_line: input line too long Jul 16 14:04:23 Tower last message repeated 15 times Jul 16 14:04:27 Tower last message repeated 7 times Once this happens I lose the option to connect to the unRAID Gui via http://Tower. I have to enter the IP address (192.168.1.20) to pull up the unRAID web Gui. This also happens if I install the Deluge_64.plg so it would appear that this is not a docker problem but I was hoping that some else here was running into similar issues? Please email Limetech direct about this as it relates to the internals of emHTTP. You should get a quick response. Also see here http://lime-technology.com/forum/index.php?topic=28736.0 which is a better place for this bug Quote Link to comment
archedraft Posted July 17, 2014 Share Posted July 17, 2014 I sent Tom an email and posted in the other forum as well. We will see what happens. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.