Juzzotec Posted November 22, 2015 Share Posted November 22, 2015 This is a "Plex" problem: http://lime-technology.com/forum/index.php?topic=42148.msg421493#msg421493 After 2 hours I worked this out, plex 0.9.14 transcoding issue Can someone explain the newbie way to downgrade to 0.9.12 On needos docker hub.. https://hub.docker.com/r/needo/plex/ It basically says to run this command, I'm guessing through telnet? When I do that, I click the log on the docker page and it shows version not changed even after a restart. Am I supposed to place the file somewhere specified. Any help is appreciated Quote Link to comment
Leifgg Posted November 22, 2015 Share Posted November 22, 2015 Don’t know if this works for every Plex container, I am not running Needos: Under Environment Variables (in the the settings for Plex, Advanced View) enter this for Variable name: VERSION and this for Variable Value: 0.9.12.19.1537-f38ac80 Quote Link to comment
Juzzotec Posted November 22, 2015 Share Posted November 22, 2015 Don’t know if this works for every Plex container, I am not running Needos: Under Environment Variables (in the the settings for Plex, Advanced View) enter this for Variable name: VERSION and this for Variable Value: 0.9.12.19.1537-f38ac80 Thanks Leifgg, I'm not sure but are you talking about inside the web gui / settings page. I'll try this when I get home.. Quote Link to comment
Leifgg Posted November 22, 2015 Share Posted November 22, 2015 Don’t know if this works for every Plex container, I am not running Needos: Under Environment Variables (in the the settings for Plex, Advanced View) enter this for Variable name: VERSION and this for Variable Value: 0.9.12.19.1537-f38ac80 Thanks Leifgg, I'm not sure but are you talking about inside the web gui / settings page. I'll try this when I get home.. Yes... (the Docker tab) Quote Link to comment
Juzzotec Posted November 22, 2015 Share Posted November 22, 2015 Yes... (the Docker tab) That worked wonders, thanks so much Quote Link to comment
ashman70 Posted November 24, 2015 Share Posted November 24, 2015 Hi I installed and configured (or so I thought) SAbNZB however its put the default folders for donwloads in /config, how can I access them through the web gui and move the files its downloaded, then how can I change the the path so the download folders are where I wan them to be which is: /mnt/cache/downloads Thanks Quote Link to comment
Squid Posted November 24, 2015 Share Posted November 24, 2015 Hi I installed and configured (or so I thought) SAbNZB however its put the default folders for donwloads in /config, how can I access them through the web gui and move the files its downloaded, then how can I change the the path so the download folders are where I wan them to be which is: /mnt/cache/downloads Thanks Add another mapping for /downloads mapped to /mnt/cache/downloads and within Sab's UI change it to store the completed in /downloads Quote Link to comment
ashman70 Posted November 24, 2015 Share Posted November 24, 2015 Where do I add the other mapping? I can't change it within the SabNZB config, or find where to anyway, under folders its defaulting to /config and I can't seem to find where to change that? Quote Link to comment
Squid Posted November 24, 2015 Share Posted November 24, 2015 Where do I add the other mapping? I can't change it within the SabNZB config, or find where to anyway, under folders its defaulting to /config and I can't seem to find where to change that? I don't use Sab, but here's where you change it: http://lime-technology.com/forum/index.php?topic=42468.msg403955#msg403955 But, you'd have to have a leading "/" infront of the paths so that they are absolute paths and not relative from /config To add another mapping, go back to docker and edit the container (click on the icon) Quote Link to comment
ashman70 Posted November 24, 2015 Share Posted November 24, 2015 When I edit the Sabnzb docker, this is the path I've had for downloads since I set it up /mnt/cache/downloads, I have no idea how it chose the /config folder. Quote Link to comment
Squid Posted November 24, 2015 Share Posted November 24, 2015 When I edit the Sabnzb docker, this is the path I've had for downloads since I set it up /mnt/cache/downloads, I have no idea how it chose the /config folder. Post a screen shot of your volume mappings when you edit the container, and of the config (folders?) screen in Sab. Quote Link to comment
ashman70 Posted November 24, 2015 Share Posted November 24, 2015 Ok here are some screen shots. I think the problem is with the settings in the container where it defaults to /config, no? Quote Link to comment
Squid Posted November 24, 2015 Share Posted November 24, 2015 Ok here are some screen shots. I think the problem is with the settings in the container where it defaults to /config, no? k. Its not actually storing it within your /config folder. Its storing the downloads within docker.img The reason is because you are mapping /downloads, but are telling sab to store everything in /Downloads. Linux for better or for worse is case sensitive on file / folder naming, and since /Downloads isn't explicitly mapped, docker assumes that it references a folder within docker.img Quote Link to comment
Squid Posted November 24, 2015 Share Posted November 24, 2015 And it would probably be a good idea to set the permissions as 777 Quote Link to comment
ashman70 Posted November 24, 2015 Share Posted November 24, 2015 Thanks, changed it from /Downloads to /download and added the 777 permissions. Sabznb has already downloaded some things, how can I access them if they are not really in the /config folder? Quote Link to comment
Squid Posted November 24, 2015 Share Posted November 24, 2015 Thanks, changed it from /Downloads to /download and added the 777 permissions. Sabznb has already downloaded some things, how can I access them if they are not really in the /config folder? No super easy way. If you're familiar with linux, you can get within the container via bash by something like this: docker exec -it SabNZBD bash (but since I don't run sab, I can't give you the exact name of the container. TBH, the easiest solution would be to just redownload what ever got stuck in there again. (If you go this route, then you'd be best off deleting Sab (image and container), then re-adding it (use the user template my-sabnzbd, so you don't need to enter in everything all over again). Since the /config got stored outside the image file, all of your settings will still be there (after you fix them of course). Quote Link to comment
ashman70 Posted November 24, 2015 Share Posted November 24, 2015 Yes I can redownload the files its no big deal. When you say deleting the Sab image and container, you kind of lose me. I go into the docker tab, and delete the Sab container, where is the image I also have to delete? Quote Link to comment
Squid Posted November 24, 2015 Share Posted November 24, 2015 Yes I can redownload the files its no big deal. When you say deleting the Sab image and container, you kind of lose me. I go into the docker tab, and delete the Sab container, where is the image I also have to delete? When you delete a container, it will ask you container only or container and image. (None of your other containers will be touched -> it'll just get rid of everything within docker.img related to Sab) That way your already completed / incomplete downloads aren't still sitting there taking up space. Quote Link to comment
ashman70 Posted November 24, 2015 Share Posted November 24, 2015 Ok thanks, my other problem is now I have these folders on my cache drive /download/complete and /download/incomplete, how can I access them so I can get my files out without having to go to a command prompt? Can I create a share that points to the folders on my cache drive? Quote Link to comment
Squid Posted November 24, 2015 Share Posted November 24, 2015 Ok thanks, my other problem is now I have these folders on my cache drive /download/complete and /download/incomplete, how can I access them so I can get my files out without having to go to a command prompt? Can I create a share that points to the folders on my cache drive? That's what I assumed you had already done. Make a new share called downloads (probably want to set it as cache only) (I think you meant downloads, not download since that what you mapped to sab (/mnt/cache/downloads) Quote Link to comment
ashman70 Posted November 24, 2015 Share Posted November 24, 2015 Thanks so much for your help Squid, it really is appreciated! Quote Link to comment
Rcwilbert Posted November 25, 2015 Share Posted November 25, 2015 My server has been up and runing 6.1.3 with needoplex with no issues. Today the plexmediaserver stopped working. I have made no changes or touched anything and it had been working fine up to this point. The server is stuck in a loop with the repeating error below: Error: Unable to set up server: sqlite3_statement_backend::prepare: disk I/O error for SQL: PRAGMA cache_size=4000 6 3000 /config/Library/Application Support unlimited Any thoughts? I have tried stop/restarting the docker. re-installing the container, and re-installing the image and the container. I am unsure what happened. Thanks for the help. Quote Link to comment
Leifgg Posted November 25, 2015 Share Posted November 25, 2015 Looks like the Plex database could be corrupt. Or some problems with your cache disk if you are using that for your config files. I would check the Plex forum to start with. Quote Link to comment
Rcwilbert Posted November 25, 2015 Share Posted November 25, 2015 It might be the cache drive. I just tried to rename the plexmediaserver folder on my cache drive to backup, so that I could try a totally clean install and I received an error. That there are zero bytes of space left. When I look at the cache drive in the dashboard, it looks all good. Plenty of space, and no errors on the smart device stuff. Quote Link to comment
Leifgg Posted November 25, 2015 Share Posted November 25, 2015 Try to do a check of the filesystem as well and see if there are any errors. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.