pkn Posted December 7, 2014 Share Posted December 7, 2014 Just reporting my findings. Addonics AD4SA6GPX2 ( 6G 4-port SATA PCIe 2X controller, Marvell 88SE9230 chipset), $55+$8 shipping at Addonics online store. It supports 4 drives directly as individual drives, or in RAID (RAID 1, 0, 10, SAFE (?) or JBOD - a single large drive), or up to 7 individual drives with use of a 4-drives port multiplier (I did not test this 7-drives functionality). Test platform: Supermicro H8DME-2 mobo, unRAID Pro 6.0-beta2. Pros: 1. Inexpensive hardware RAID. 2. For individual drives, the card is pretty much plug-n-play - insert, connect drives, boot up - it works. I did parity rebuild and parity checks - no problems. I did not do preclear. 3. Hardware RAID - no drivers needed as long as your OS has built-in AHCI inbox driver support (unRAID 6.xxx, apparently, has it) 4. Fast - drives speed tests with jbartlett's diskspeed.sh show no difference from Supermicro SAT2-MV8 cards, which are PCI-X. Cons: 1. In RAID configuration, seems to be not reporting drives temperature (expected). 2. In RAID configuration, seems to be not going to spindown (unexpected). Updated: it does go to spindown. 3. Takes 8-10 seconds to boot, adding to already slow reboot time. 4. To configure RAID, your have to catch the (short) moment of the card black boot screen to hit Ctrl+M. Luckily, configuration itself is very easy, and RAID initialization is instantaneous. Conclusion: I needed hardware (i.e., no hassle) RAID-0 for faster unRAID cache drive, for that purpose this card fits the bill perfectly. It also works as RAID-0 for parity drive - parity rebuild and parity check worked no problems, so if you need big and fast parity and have drive slots available, go for it. Using it for driving individual drives might be not economical - AFAIK, there are cheaper non-RAID alternatives (read: SYBA). Attached are PDFs showing speed test results. DiskSpeedTest_Front_2014-12-06-1955.pdf DiskSpeedTest_Front_2014-12-06-2035.pdf Quote Link to comment
pkn Posted December 7, 2014 Author Share Posted December 7, 2014 Attached the third PDF showing speed test when in RAID-0 configuration for cache drive (previous post wouldn't take it because of size restrictions). Note that RAID-0 is built out of two 2TB drives (Samsung 5400 + Hitachi 7.2 k) so it's very much less than optimal, but still considerably faster than a single 3TB 7200 drive. DiskSpeedTest_Front_2014-12-06-2133.pdf Quote Link to comment
pkn Posted December 14, 2014 Author Share Posted December 14, 2014 Added this card to the Wiki. Quote Link to comment
tucansam Posted June 6, 2015 Share Posted June 6, 2015 Does this work under unraid 5.x? Quote Link to comment
garycase Posted June 6, 2015 Share Posted June 6, 2015 Thanks for the feedback. I've suggested this card to several folks, but always had to caveat that I hadn't actually used it => nice to have confirmation that it works as well as I'd anticipated. Quote Link to comment
kuhnamatata Posted January 21, 2016 Share Posted January 21, 2016 In case anyone else is considering this card I recently installed this controller card with 6.1.7 and was not able to see attached hard drives, there is some sort of bug with Marvell Sata controllers with VT-d check out post below to fix. http://lime-technology.com/forum/index.php?topic=45742.0 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.