UPS not shutting down unRAID

I trying to configure the following UPS CP1500PFCLCD to cleanly shutdown the server after 30 seconds on battery. unRAID recognizes the UPS and prompts me with notifications when I trip the UPS. Please see screens. But unfortunately the server remains on. I keep the UPS unplugged for a couple of minutes to see if it would shutdown the server, alas it does not. I then plugged it back in as you can see.

Aug 24 18:58:52 petunia apcupsd[9359]: Power failure.
Aug 24 18:58:58 petunia apcupsd[9359]: Running on UPS batteries.
Aug 24 18:59:29 petunia apcupsd[9359]: Reached run time limit on batteries.
Aug 24 18:59:29 petunia apcupsd[9359]: Initiating system shutdown!
Aug 24 18:59:29 petunia apcupsd[9359]: User logins prohibited
...
Aug 24 19:01:23 petunia apcupsd[9359]: Communications with UPS restored.
Aug 24 19:01:23 petunia apcupsd[9359]: Mains returned. No longer on UPS batteries.
Aug 24 19:01:23 petunia apcupsd[9359]: Power is back. UPS running on mains.
Aug 24 19:01:23 petunia apcupsd[9359]: Allowing logins
Aug 24 19:03:23 petunia emhttp: /usr/local/emhttp/webGui/scripts/tail_log syslog 2>&1

Screenshot of settings page:

http://i.imgur.com/nMTwcw6.png

When I look at /etc/apcupsd/apccontrol, it appears to do the timeout block but not the doshutdown block

    timeout)
echo "Battery time limit exceeded on UPS ${2}. Doing shutdown." | ${WALL}
    ;;
    doshutdown)
echo "UPS ${2} initiated Shutdown Sequence" | ${WALL}
${SHUTDOWN} -h now "apcupsd UPS ${2} initiated shutdown"
    ;;

Plugins installed besides default:

Dynamix S3 Sleep, Nerd Tools

unRAID: 6.1-rc5

cat  /var/log/apcupsd.events
2015-08-24 18:51:46 -0400  apcupsd 3.14.13 (02 February 2015) slackware startup succeeded
2015-08-24 18:52:16 -0400  apcupsd exiting, signal 15
2015-08-24 18:52:16 -0400  apcupsd shutdown succeeded
2015-08-24 18:52:16 -0400  apcupsd 3.14.13 (02 February 2015) slackware startup succeeded
2015-08-24 18:58:52 -0400  Power failure.
2015-08-24 18:58:58 -0400  Running on UPS batteries.
2015-08-24 18:59:29 -0400  Reached run time limit on batteries.
2015-08-24 18:59:29 -0400  Initiating system shutdown!
2015-08-24 18:59:29 -0400  User logins prohibited
2015-08-24 19:01:23 -0400  Communications with UPS restored.
2015-08-24 19:01:23 -0400  Mains returned. No longer on UPS batteries.
2015-08-24 19:01:23 -0400  Power is back. UPS running on mains.
2015-08-24 19:01:23 -0400  Allowing logins
2015-08-24 19:37:41 -0400  apcupsd exiting, signal 15
2015-08-24 19:37:41 -0400  apcupsd shutdown succeeded
2015-08-24 19:37:41 -0400  apcupsd 3.14.13 (02 February 2015) slackware startup succeeded
2015-08-24 19:38:26 -0400  apcupsd exiting, signal 15
2015-08-24 19:38:26 -0400  apcupsd shutdown succeeded
2015-08-24 19:38:26 -0400  apcupsd 3.14.13 (02 February 2015) slackware startup succeeded

Missing something here... Thoughts?

I wonder if this applies -

Other changes (6.1-rc6)

-----------------------

- apcupsd: fix regression: 'powerdown' script not invoked correctly

That could explain a lot, thanks for the heads up!

I just installed an ups and experience the exact same thing on 6.1 final. Is there already a solution for this?

I just installed an ups and experience the exact same thing on 6.1 final. Is there already a solution for this?

The regression error is fixed in v6.1 final.

I tried running the powerdown script in /usr/local/sbin manually through ssh but nothing happened either. shouldn't the server shutdown in this case?

I tried running the powerdown script in /usr/local/sbin manually through ssh but nothing happened either. shouldn't the server shutdown in this case?

Powerdown works properly in v6.1, it may take some minutes before the actual shutdown/reboot happens though.

I guess I found out why it does not work. I'm running the webGui on port 8008 because plexconnect needs port 80. The powerdown script states that it needs the webGui to be running on port 80.

It happened to me this morning. I was alerted that the server was running on battery.

I had to turn it off manually because the battery/minutes went lower than the threshold and despite the fact that the UPS printed "SHUTTING DOWN" nothing happened.

I'm running unRAID 6.1.3

I guess I found out why it does not work. I'm running the webGui on port 8008 because plexconnect needs port 80. The powerdown script states that it needs the webGui to be running on port 80.

Wait, I just realized it is my problem also. Why this limitation?

Same here.

I guess I found out why it does not work. I'm running the webGui on port 8008 because plexconnect needs port 80. The powerdown script states that it needs the webGui to be running on port 80.

 

Wait, I just realized it is my problem also. Why this limitation?

Have any of you folks tried the Powerdown package as developed in this thread?

    http://lime-technology.com/forum/index.php?topic=31735.0

It was designed to cure a lot of problem that the original script did not address.  Be sure that you get the one for ver 6.0.