Nicktdot Posted April 3, 2016 Share Posted April 3, 2016 Saw this earlier in the week and ordered one to see. My existing system has a higher end CPU so I swapped out the board and upgraded to it from a Norco RPC4224 , but this is still a pretty good deal for a 48 drive full system.. It's a Chenbro NR40700 , which has 2 integrated 24 bay expanders in the drive backplane. http://www.chenbro.com/en-global/products/RackmountChassis/4U_Chassis/NR40700 The systems are complete with LSI-9211-8i, Xeon X3450 and 32GB RAM . So for a full system, the asking price is pretty good. See link below: http://www.ebay.com/itm/Chenbro-48-Bay-Top-Loader-4U-Chassis-w-Rail-Kit-Drive-Brackets-COMPLETE-SYSTEM-/252334824504 Cheers Quote Link to comment
nightanole Posted April 5, 2016 Share Posted April 5, 2016 I dont even want to know how much that thing might weigh fully loaded... Quote Link to comment
switchman Posted April 5, 2016 Share Posted April 5, 2016 I bet it also sounds like a jet airplane taking off. Quote Link to comment
Nicktdot Posted April 9, 2016 Author Share Posted April 9, 2016 I dont even want to know how much that thing might weigh fully loaded... Well, if it helps, it was 95lbs empty Quote Link to comment
Nicktdot Posted April 9, 2016 Author Share Posted April 9, 2016 I bet it also sounds like a jet airplane taking off. Sounds more like a Tu-95 ! I swapped out the fans with Noctua. so now it's super quiet. Quote Link to comment
CyberSkulls Posted April 9, 2016 Share Posted April 9, 2016 Just cause I'm curious, how much power does that thing draw at idle with no disks or how much wattage with disks and tell me how many disks are included in that figure? I've always been fascinated by the 36 bay variant of the backblaze pods. When unRAID reaches that level of data disks for the pro license I may have to build a couple of the 36 bay Sent from my iPhone using Tapatalk Quote Link to comment
BRiT Posted April 9, 2016 Share Posted April 9, 2016 I've always been fascinated by the 36 bay variant of the backblaze pods. When unRAID reaches that level of data disks for the pro license I may have to build a couple of the 36 bay unRaid is already there in the 6.2 beta series. Pro key supports max 30 array devices, unlimited attached devices Quote Link to comment
CyberSkulls Posted April 9, 2016 Share Posted April 9, 2016 Sorry, I was referring to 36 array devices. I'm sure the vibration would kill my drives in a backblaze inspired pod but it would just be fun to build one. Sent from my iPhone using Tapatalk Quote Link to comment
BRiT Posted April 9, 2016 Share Posted April 9, 2016 Sorry, I was referring to 36 array devices. I'm sure the vibration would kill my drives in a backblaze inspired pod but it would just be fun to build one. Well I think you can have 24 devices in the cache pool along with 30 data drives. Quote Link to comment
Bigdady92 Posted April 13, 2016 Share Posted April 13, 2016 how loud are the fans? Those hot swap fans are mini hurricanes and obnoxious Quote Link to comment
tmargalit Posted October 13, 2016 Share Posted October 13, 2016 What fan did you use for the power supplies? Quote Link to comment
Lev Posted October 24, 2016 Share Posted October 24, 2016 I like this case a lot, thinking about buying it but need help with one question I can't seem to find the answer to in all the documentation. There appear to be two backplanes 'expanders' in it, each supports 24 drives. Each backplane has 3 sas connectors on it. I'm confused as to the three sas connectors on the backplane, does each connector only go to 8 of the 24 disks? Or is it something else? Many of the photos I found online only show one sas cable going into each backplane, which makes me think it operates as a 24 port expander, but then that doesn't make any sense cause why have 3 sas connectors on the backplane, it would only be one or two (dual linking). Does anyone how owns this case know how it works and can get me sorted. Trying to figure this out so I know what performance to expect. Cheers! Quote Link to comment
JorgeB Posted October 24, 2016 Share Posted October 24, 2016 I like this case a lot, thinking about buying it but need help with one question I can't seem to find the answer to in all the documentation. There appear to be two backplanes 'expanders' in it, each supports 24 drives. Each backplane has 3 sas connectors on it. I'm confused as to the three sas connectors on the backplane, does each connector only go to 8 of the 24 disks? Or is it something else? Many of the photos I found online only show one sas cable going into each backplane, which makes me think it operates as a 24 port expander, but then that doesn't make any sense cause why have 3 sas connectors on the backplane, it would only be one or two (dual linking). Does anyone how owns this case know how it works and can get me sorted. Trying to figure this out so I know what performance to expect. Cheers! I don't know that backplane but usually the 3rd connector is for daisy chaining another chassis. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.