scotttiamit

Awesome, thanks. I wasn't sure how to do that but found another forum showing how to connect to a containers file system. docker exec -it tvheadend bash

Hi I have a XMLTV script for EPG that I want to get to show as an option in the 'EPG Grabber Modules' how/where do I copy my tv_grab_nz-py file? I used Krusader docker to copy it into the /media/appdata/tvheadend/.xmltv folder and restarted tvheadend docker but I am still not seeing this as an option? Thanks.

Oops scratch that, sorry. I just had to remove my old broken sickrage now it is starting OK. Now to do all the config again...

I have installed the docker but cannot get into the webpage, no option to see log either?

I am also having issues with the rollback and cannot get into the web interface in order to do a backup. Any ideas?

Hi guys. Also FYI it seems to keep dropping my NZBGeek API key. I have added and saved several times. When I go back to the setting it is gone again. Also showing the related warning in the logs. 2018-10-19 15:23:01 WARNING::SEARCHQUEUE-BACKLOG-76316::[NZBGeek]::Invalid api key for NZBGeek. Check your settings

OK thanks. Done.

I did a 'nano /etc/resolv.conf' and updated the file and saved the changes. I presume this will work for now, not sure if it will stick after a reboot or not but there must be a bug around the GUI settings not being applied correctly.

Hi, result is 52.32.39.15 which should be 8.8.8.8 and 8.8.4.4 as set in the settings.

Any ideas anyone? This is still not working as intended?

kotik-diagnostics-20171222-1138.zip Diagnostics attached.

Thanks mate but I cannot turn the DNS off on the firewall as this needs to be used by other devices as we use a DNS filtering service. Just need unRAID to use what is set. I will try dumping the diagnostics info...

Hi guys, I have my unraid configured to use google for DNS but for some reason it instead keeps using DNS as it would be provided via DHCP? I have stopped the array and set it then started the array again, it stays the same, even a reboot did nothing. I have set it both through the GUI and manually in network.cfg file. I wasn't sure what DHCP_KEEPRESOLV meant exactly but have tried this as yes and no. I know the DNS is not working as it should because I can see in the firewall logs the DNS traffic from my unRAID using the wrong DNS server as you can see in the image below, the 52.32.39.15 address is the DNS server that would be provided via DHCP but that isn't enabled. Unraid version 6.3.5 Thanks. # Generated settings: IFNAME[0]="eth0" DESCRIPTION[0]="" USE_DHCP[0]="no" IPADDR[0]="192.168.0.100" NETMASK[0]="255.255.255.0" GATEWAY="192.168.0.5" DHCP_KEEPRESOLV="no" DNS_SERVER1="8.8.8.8" DNS_SERVER2="8.8.4.4" DNS_SERVER3="" MTU[0]="" SYSNICS="1"

PLEX Docker settings attached. I imagine it is more unRAID then PLEX though as the files are missing from the share. did you mean unRAID diagnostics or PLEX?

https://github.com/ukdtom/WebTools.bundle