mtruffa

I ma have the same problem but cannot figure out the problem. I know the obvious problem i have is one of my disks are bad in my pool which I am replacing today. But I can not seam to figure out the cache drive issue. I want to ge this fixed as I am going to replace almost everything but the disks this week. I have attached my diagnostics. Thank you in advance for any help tower-diagnostics-20231231-1036.zip

For the life of me I can not get the windows sync to connect. I can access NC via web when I trying to set up the client I either get timeout or it goes to the next part and I get This site can’t be reached nextcloud.server.com took too long to respond. I have removed and reinstalled everything with still no luck. I recently switched ISP's and I thought that was the problem but when I do a traceroute I get the Wan IP. I have looked everywhere and see this is a problem but I have not found a answer. Any Help would be great.

Thank you that worked. Finally.

Here is my run command root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='PlexMediaServer' --net='host' -e TZ="America/New_York" -e HOST_OS="unRAID" -e 'PUID'='99' -e 'PGID'='100' -e 'VERSION'='latest' -v '/mnt/user0/':'/mnt':'rw' -v '/tmp':'/transcode':'rw' -v '/mnt/cache/appdata/Plex':'/config':'rw' 'linuxserver/plex' 9a7722fd96805b8361a8247f39f977a2641bafddf791cfde3816397b287cafa6

I do not know what/where that is. Where would I find it?

Update: It does find the files after mover has run. It never did this before. The only thing that has changed is that I moved from sickbeard plugin to sickrage docker.

I just had to move the database to a new location. When I did that I had to re-add all my libraries. Since then it take days for new shows to show up in the library even though they are there. I have sickrage notifying Plex that they are done and they still do not show up. When I do a manual scan it only scan a small portion of the shows and then says "Library scan complete. Extra information may still be downloading from the internet. Every time I do a scan it seems to only scan the same shows. I have read several topics but can not seem to find a answer to this issue

Then why is more being copied than what is on the original disk. What I might do is stop it because the destination disk is at 95% full and it looks like there still is more. I will then reformat the drive and then try a disk than has much less data and see if it does the same thing.

The gui is down now so here is the info from putty. login as: root [email protected]'s password: Last login: Mon Mar 27 00:41:16 2017 from 192.168.1.151 Linux 4.9.10-unRAID. root@Tower:~# df /mnt/disk6/ Filesystem 1K-blocks Used Available Use% Mounted on /dev/md6 1953454928 1490251416 463203512 77% /mnt/disk6 root@Tower:~# df /mnt/disk17/ Filesystem 1K-blocks Used Available Use% Mounted on /dev/md17 1952560688 1643476600 309084088 85% /mnt/disk17 root@Tower:~# I did the rsync -avPX /mnt/disk6/ /mnt/disk17/ and as you can see it has copied a lot more than what is on the drive (disk6) and there is still is some to go according to what file it is on now. I made sure the drive was empty be fore starting. If I quit the operation and reformat the drive and restart will it pick up where it left off or will it start from the beginning?

What happen is when swapping the drives I forgot to hit "Parity is Valid". I did not want to stop it after the parity reconstruct start I was afraid that something would go wrong.

not that I know of.

Why when doing a rsync would more files be copied than are on the original disk. The original disk has 1.52 tb of data currently 1.7 tb have been copied and it is still going. The drive is getting full.

sorry I attached the wrong file. Here is the diagnostic file. tower-diagnostics-20170321-2041.zip

here is the syslog and smart report on the extended test i ran. No errors found. I also ran reiserfsck --fix-fixable and no errors found. tower-syslog-20170321-1941.zip tower-smart-20170321-1913.zip

I started my conversion of 16 drives to XFS and when I got to disk4 I got the following error REISERFS warning (device md4): jdm-20001 reiserfs_xattr_get: Invalid magic for xattr (user.org.netatalk.supports-eas.axBWPi) associated with [2 4 0x0 SD] Any thoughts?