French-Guy

Members
  • Posts

    320
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

French-Guy's Achievements

Contributor

Contributor (5/14)

3

Reputation

  1. I have an old 1.5TB drive (still runs fine) but with Black Friday approaching, I may replace it by a new one, larger I have 2 free bays in my rack....How should I preclear it before replacing the old one? Thanks
  2. So which one is really better? Is the Plus a must have and worth the $20 difference?
  3. Hello Was at my local Microcenter, and noticed WD Red Plus 4TB hard drive on sale for $80 I saw the WD Red 4TB on Amazon for $61 What is the difference between WD Red and Red Plus? My server doesn't run 24/7...I turn it on when I need it Assuming I want to buy 1 or 2 drives, can I go with the Red or it's important to get the Red Plus? Thanks
  4. well...that's weird ! I've installed the X6 1055T and its motherboard (GA 880) in another case to use it as a Windows machine I wanted to try 1 more time with the trial flash drive.....and it seems to work ! The only difference is the PSU (I doubt it's the reason) and the absence of the LSI card (SAS 9211 -8i) I have in my server Would it be a compatibility issue between the LSI card and the GA880?
  5. well, false alarm....my server is back in business and running as it was before Too bad it seems my X6 1055T with the gigabyte GA880 didn't work......well, maybe not since power consumption would have not been ideal with such CPU I may need to find something more efficient but still cheap
  6. I must be cursed...I've put back the previous motherboard+CPU And this time, it's the whole box that doesn't even turn on !!!! I did verify at least 5 times the jumpers from the front panel, and they are properly plugged If the PSU quit, then I'm really out of luck.... !
  7. I have virtualization in my BIOS, and it is set to DISABLED...
  8. Well, I just tried with a Kinsgton Datatraveler 2.0, and I'm getting the exact same results. Blinking cursor after "Loading /bzroot...OK" That's weird Even when I try the memtest86+, it says loading memtest...OK, but then nothing other than a blinking cursor That's very frustrating......!
  9. So when I try that, there is no risk to alter any of my drives, right? I just let the server boots, but don't go any further?
  10. I will check what flash drives I have on hand, and will give it a try.... If I were to buy a new one, what brands/models are recommended?
  11. It's an old motherboard (Gigabite GA880) and I don't think I've seen anything about SVM ( AMD-V ) / IOMMU in the BIOS................But I will look again
  12. How should I try with a different flash drive? Use the USB creator first, and then what are the folders or files to copy from my current flash drive to the new one? My current flash drive is a Sansisk Cruzer Fit 4Gb (which is not that old by the way)...What other recommended brand should I try then? Thank you
  13. Could it be the power supply (Corsair CX430) being too weak for this CPU ? What would be the symptoms then? But.....knowing I can access the BIOS, and Unraid starts the boot process anyway (loading bzimage, then loading bzroot...) doesn't it mean the PSU is enough?
  14. I tried to download the latest release (6.8.3 - the one I was running) and extracted bzimage, bzroot and bzroot-gui and replaced them on my flash drive Didn't change anything I also tried the safe mode (with or without GUI) but nothing Same thing for the memtest.....it says download memtest, but nothing happens I know this mobo+cpu+ram works because I used it as my main computer with Windows 10 for many years !!! Please help.....what should I check? Is there anything in the BIOS I may have missed? I would hate to have to reinstall the previous motherboard+CPU....! Thanks