Sean M.

Members
  • Posts

    67
  • Joined

  • Last visited

Converted

  • Gender
    Male
  • Location
    Philadelphia, PA

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Sean M.'s Achievements

Rookie

Rookie (2/14)

6

Reputation

  1. All set now! Thanks for the prompt replies and awesome plugin!
  2. Results from command line: And yea if I disable USBIP in the plugin settings then no error and things look as expected
  3. I am running 6.9.2 and not out of the gate planning to use USBIP but just wanted to make sure everything was setup correctly.
  4. Looking to get this up and running but getting the following error message "Following are missing or not loaded: USBIP Commands." from the above replies it seems that the "usbip-1 package" is not being installed for whatever reason? I tried uninstalling both plug-ins, restarting unraid, etc however no luck. Any tips? I'm installing the latest "USB Manager (BETA)" from the App store and have not installed any versions of this plugin previously. I can see the libvirt.img was created under a system share. Here are my settings:
  5. So figured I would give this a whirl, getting the error "No data in Elasticsearch index! After a crawl starts it can take up to 30 sec (refresh time) for index to be updated... Reload." I followed this guide from raqisasim. Installation right now looks like: Redis version = 6.0.9 Elasticsearch version = 5.6.16 Diskover version = v1.5.0.9 I saw from the latest Diskover Github readme that it mentions an Auth token; would that be the reason it's not crawling any data? Anyone tried to set this up recently with the latest versions have any tips? The UI loads fine and I don't see any errors or warnings in the log, they all appear to have started successfully.
  6. I was reading through this thread: Overclocked.com in which they debate the same topic of FF being good vs an error, some users reported display errors they were having with FF so not sure if that's the case. I unfortunately do not have another monitor lying around with displayports or an adapter handy 😔 I was planning on relying on the iGPU alone for this build so my assumption would be that it was defaulting to per your description. I don't have a 'spare' PCIe GPU but I do have an old XFX Radeon HD 6950 in my desktop that I could pull out to test perhaps - seems like it is compatible. I triple checked the pins when I reseated everything this AM but truthfully I've never seen a bent pin in person so perhaps I just don't know what I'm looking for...
  7. So I reseated everything once more, still ran into the same error when starting up 78 -> plug in mouse -> 64. However in frustration (or luck) I thought why not plug in my unraid flash and see what happens...well...the unraid server starts up and I'm able to get into the Unraid GUI by navigating through my network! Even with it started I am seeing "FF" as the error code on the bios display. I also cannot get anything from either of the display ports so I have no way to get into the BIOS...I don't think? The unraid GUI confirms the BIOS is at version F5 which is the latest but I still would like to get into the BIOS as I need to tweak the settings per my understanding to enable the iGPU passthrough for HW Transcoding. Any advice based upon my the latest troubleshooting?
  8. Cleared both ways, result always ends up the same
  9. Fair enough; I'll see if/when they get back to me and what they say. Perhaps they can use the serial # to identify the BIOS it shipped with at least. Thanks for taking the time to read through and reply!
  10. Debating ordering a cheap supported 8th gen processor from Amazon (Intel Pentium Gold G5400) and then returning it after...not sure if that's a thing or if it will 100% solve the issue obviously.
  11. Interesting! That's great ASRock would have customer service that helpful...I'm not sure if I'll get as lucky with Gigabyte but we'll see if they reply to my support ticket at all. This is the first motherboard I've ever had this much trouble finding the BIOS version on tbh, I read all through the manual and went over the board with my phone flashlight but could not find a BIOS callout just the board revision. 🤔
  12. Thanks for reading about my issue! Yes, I tried 1 ram stick across the board A1, A2, B1, B2 with no luck unfortunately. Since I'm unable to get into the BIOS at all right now, I don't believe I have a way to update the BIOS. I don't have another CPU around that's compatible nor does this board have Q-Flash Plus (ability to flash bios with no boot screen).
  13. Hello - I just completed a few upgrades on my unraid server and am now stuck in motherboard error purgatory...hoping someone smarter than I can offer some assistance as I'm at my wits end. Put CPU, MB, RAM together. Start it up. I first get an error 78, then I plug in a mouse to the usb slot and then it changes to an error 64. I have tried the following: Taking memory sticks out, have tried A1 only, A2, only, B1 only, B2 only, A1 & B1, A2 & B2 - always end up in the same place as described above Resetting CMOS using CMOS reset button as well as unplugging all power and removing battery than putting back in - end up in the same place as described above Reseating CPU and RAM - end up in the same place as described above Error Code 78 | ACPI Core initialization Error Code 63~67 | CPU DXE initialization started Source I have no hard drives or other devices plugged into the motherboard, it is only CPU, RAM and power supply. There is no separate GPU. I cannot get the BIOS version as I don't even get to the BIOS screen in the boot process and for whatever reason I cannot find it on the motherboard. Build: CPU: Intel Core i5-9600K 3.7 GHz 6-Core Processor ($199.99 @ Amazon) Motherboard: Gigabyte C246-WU4 ATX LGA1151 Motherboard ($261.99 @ Amazon) Memory: Corsair Vengeance LPX 32 GB (2 x 16 GB) DDR4-2666 CL16 Memory ($114.99 @ Amazon) Case: Fractal Design Define R5 Blackout Edition ATX Mid Tower Case Power Supply: SeaSonic G 550 W 80+ Gold Certified Semi-modular ATX Power Supply I've triple confirmed both the CPU and RAM are on the compatibility list for the MB. Greatly appreciate any advice or guidance. I have requested a call back from Gigabyte tech support as well as sent in a support request to their portal but I don't expect them to get back to me anytime soon... My guess is one of the 3 new components (CPU, RAM, MB) is defective, which ultimately is fine, I just want to quickly handle the return/replacement through Amazon to get this thing back up and running.
  14. Thank you for the feedback and exactly the reason I posted! I'm fine with this memory $ range went back to the QVL and checked against the 3200 and PC part picker, this looks like a better option // Memory: Kingston HyperX Predator 64 GB (4 x 16 GB) DDR4-3200 CL16 Memory ($285.76 @ Amazon) Any other red flags or things that jump out? -- I guess one thing I hadn't thought through fully is if switching to AMD would be a + or - to my transcoding capabilities through plex which peaks around ~10 at any given time... Since I hadn't planned on an dedicated GPU, perhaps an intel quicksync build would be better to leverage hardware transcoding? Here's a quick view of that: CPU: Intel Core i7-9700K 3.6 GHz 8-Core Processor ($289.99 @ B&H) Motherboard: Asus PRIME Z390-A ATX LGA1151 Motherboard ($169.99 @ Amazon) Memory: G.Skill Trident Z RGB 32 GB (4 x 8 GB) DDR4-3200 CL16 Memory ($174.99 @ Amazon)
  15. TL;DR: MB no longer working after 6+ years, manufacturer did not grant RMA, need to replace but debating pairing that with an upgrade which is outlined below - looking for any feedback/advice. Current: CPU: Intel Xeon E3-1240 V3 3.4 GHz Quad-Core Processor Motherboard: ASRock E3C226D2I Mini ITX LGA1150 Motherboard Memory: Crucial 16 GB (2 x 8 GB) DDR3-1600 CL11 Memory Upgrade: CPU: AMD Ryzen 7 3700X 3.6 GHz 8-Core Processor ($324.98 @ Newegg) Motherboard: MSI MAG B550 TOMAHAWK ATX AM4 Motherboard ($179.99 @ Newegg) Memory: G.Skill Ripjaws V 64 GB (4 x 16 GB) DDR4-3600 CL16 Memory ($299.99 @ Newegg) Static: Case: Fractal Design Define R5 Blackout Edition ATX Mid Tower Case Power Supply: SeaSonic G 550 W 80+ Gold Certified Semi-modular ATX Power Supply Custom: SAS9211-8I 8PORT Int 6GB Sata+sas Pcie 2.0 Storage: Cache/Apps | Crucial M500 120GB SSD Parity | Western Digital 12TB 5400RPM Data 1 | Toshiba X300 5TB 7200RPM Data 2 | Seagate ST6000DM003 6TB 5400RPM Data 3 | Seagate ST4000DM004 4TB 5400RPM Data 4 | Seagate ST3000DM008 3TB 7200RPM Data 5 | Seagate ST33000651AS 3TB 7200RPM Data 6 | Seagate ST33000651AS 3TB 7200RPM Dockers: Plex, Tutalli, Radarr, Sonarr, Bazarr, NZBGet, OpenVPN, Grafana, InfluxDB, Untelegraf VM: Windows 10 Long Story: Originally built first unraid machine back in 2014 in a Fractal Node case (upgraded to Define R5 in 2016) Turned off the machine for the first time in a while this past weekend; seems the MB no longer wants to work - reached out to ASRock tech support and went through all troubleshooting (CMOS reset, 1 memory stick test, VGA POST error failure, etc) and they said submit for an RMA which was ultimately denied so time for an upgrade In lieu of just replacing this very specific board or getting a very specific compliment that works with the current CPU & RAM figured might as well take the time to upgrade all 3 and future proof a bit more as I do hope to continue to tinker with the system in the future Looking for advice on if this may be overkill? Am I overlooking any other factors of compatibility conflicts? I don't believe I need a dedicated GPU (not doing gaming or video editing) but open to any and all suggestions! Thanks for reading! Edit: Perhaps worth noting average Plex transcode is 3-5 peaking at ~10, been reading lengthy discussions on AMD v. Intel on this and my head is spinning.