brun0 Posted February 2, 2015 Share Posted February 2, 2015 Hi, I'm running unRAID v6 beta12 and have a problem starting up when more than 26 drives are attached to the server. Drive 27 is recognized correct as sdaa, but it seems unRAID only supports 3 charakter drives (sda-sdz). When I boot the server one of the unRAID disks is getting assigned as sdaa and then it won't be recognized as a device. Mounting and accessing the drive in shell is possible so it seems to be a emhttp problem. I have installed 24 Data Drives, 1 Parity, 1 Cache Disk, the USB Device to boot and another Harddisk where I store my Virtualbox VMs. If I power up the 27. device after the system boot is finished the last device is assigned to sdaa and unraid is running without issues, but I have to load all the drivers and services which should start at boottime by hand. Quote Link to comment
StevenD Posted February 2, 2015 Share Posted February 2, 2015 This is a WELL KNOWN limitation! Quote Link to comment
SSD Posted February 2, 2015 Share Posted February 2, 2015 If you could arrange ports so your extra hard disk to store VMs is the sdaa device, you should be ok. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.