dlandon

Unassigned Devices - Managing Disk Drives Outside of The unRAID Array

2245 posts in this topic Last Reply

Recommended Posts

On 5/31/2018 at 12:13 PM, aptalca said:

I have some nfs mounts and on the dashboard, only some of them show the used space correctly. I have a suspicion it might have to do with spaces in mount names. Notice how in the attached screenshot, the ones without spaces show correctly and the ones with spaces don't?

 

Thanks

Capture81.PNG'

It's possible that the spaces are causing an issue.  I thought the naming of mount points did not allow spaces.  For the moment, don't use spaces in the mount point name.  When I get some time I can look into it further.

Share this post


Link to post
6 hours ago, Quiks said:

Hi, I recently changed the security on my windows shares. Previously everyone had read/write/etc access and I was able to mount my shares in unraid without issue using this plugin

 

I've created a single user that has write access to these shares now.

 

domain\user

 

I cannot mount my share using the following info

 

IP/Host: 192.168.1.60

Username: domain\user

Password : password

Share: R

 

I ran into a similar issue using cifs in ubuntu and I had to specify domain=domain in the command or credentials file.

Is there a way to do a domain=xxx in this plugin without using the command line?

 

image.png.82eb3e5544d07ce87dbb247f8a8dca6b.png

 

clicking mount on the R share refreshes the page, but yields the same results

logs:


Jun 1 10:29:23 Tower unassigned.devices: Mount of '//192.168.1.60/R' failed. Error message: mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) 
Jun 1 10:34:40 Tower unassigned.devices: Mount SMB share '//192.168.1.60/R' using SMB1 protocol.

 

Thanks!

I might be able to provide some assistance if you posted diagnostics.  As I've said many times, a log snippet is fairly useless.

Share this post


Link to post
On 5/31/2018 at 12:13 PM, aptalca said:

I have some nfs mounts and on the dashboard, only some of them show the used space correctly. I have a suspicion it might have to do with spaces in mount names. Notice how in the attached screenshot, the ones without spaces show correctly and the ones with spaces don't?

 

Thanks

Capture81.PNG

Fixed in the next release.  This same issue also showed up on samba and iso shares.

Share this post


Link to post
12 hours ago, dlandon said:

Fixed in the next release.  This same issue also showed up on samba and iso shares.

 

Works great. Thanks

Share this post


Link to post

I cant see anything but I wanted to check to make sure since this is such a  long thread. I am in the process of migrating to XFS and I have found that one RFS disk that will mount happily with unraid wont mount at all with UD.

 

dmesg shows

 

[Tue Jun 19 15:40:36 2018] REISERFS warning (device sdc1): sh-2021 reiserfs_fill_super: can not find reiserfs on sdc1

 

so before I get into this are there any know relevant issues?

 

Update: well it turns out its pretty obvious why UD cant mount this reiser disk.... thats because it is xfs.

 

# file -sL /dev/sdc*
/dev/sdc:  DOS/MBR boot sector; partition 1 : ID=0xee, start-CHS (0x0,0,2), end-CHS (0x3ff,255,63), startsector 1, 4294967295 sectors, extended partition table (last)
/dev/sdc1: SGI XFS filesystem data (blksz 4096, inosz 512, v2 dirs)

 

any ideas why UD is trying to mount a XFS disks as ResierFS?

 

 

Share this post


Link to post

Hi All,

 

Really sorry if this has been covered but there is just so much about this plugin that i'm struggling to find what i need

 

I'm testing something for backups so i have attached an old usb cradle to my machine. This cradle accepts 2 HDD's and shows them as a JBOD to the host.

Unassigned devices detects them as in the attached screen shot.

 

Problem is, if i try and change the mount point names (as right now it would try and mount them both in the same place), it changes the path of both devices.

 

Checking the config is adds this:

[ICY_BOX_IB-3620_PROLIFICMP000000B86]
mountpoint.1 = "/mnt/disks/ICY_BOX_ICY_BOX_IB-362"

So i can't actually give them separate names as its linking to the main device names. Does anyone know how to fix this issue or work around it?

 

I'm trying to use rsync and want to keep the permissions hence using xfs

 

Regards,

Jamie

Capture.PNG

Share this post


Link to post

Hi All,

 

I have an issue wuth this plugin

 

I have 2 UNRaid servers   

 

(SA) - i use for my VM And Docker 

 

ASUSTeK COMPUTER INC. - RAMPAGE V EXTREME

Intel® Core™ i7-5960X CPU @ 3.00GHz

64 GB (max. installable capacity 512 GB)

 

(SB) I use for media storage

 

HP ProLiant DL320s

intel xeon 

4GB Ram

 

 

I can mount a shares from (SB) to (SA) Without any issues, but if i go to click on the mounted share all i get is a loading icon and unassigned drives hangs ...  if i do this in reverse it works ok 

 

any ideas ? 

 

 

Share this post


Link to post
13 hours ago, bigjme said:

Does anyone know how to fix this issue or work around it?

It's a common problem with USB enclosures, AFAIK no way around that.

Share this post


Link to post
9 hours ago, johnnie.black said:

It's a common problem with USB enclosures, AFAIK no way around that.

Thanks johnnie.black, i will write something to use the UUID instead :)

Share this post


Link to post

Anybody able to point me to some tips for mounting an SMB volume shared by a Mac with UD?  I'm not having much luck and must be missing something silly...

 

Thanks!
 

Share this post


Link to post
1 hour ago, mbezzo said:

Anybody able to point me to some tips for mounting an SMB volume shared by a Mac with UD?  I'm not having much luck and must be missing something silly...

 

Thanks!
 

Shouldn't be too hard. I just Select the protocol and use the Search Workgroup button, but entering the IP of the Mac also works.

 

SafariScreenSnapz106.jpg.438d8f2272efa9dc06174882adfbd332.jpg

 

Then enter your username and password. Clicking Load Shares will give you a pull down list of shares available.

Share this post


Link to post

Thanks wgstarks - I'm doing all that, but when I click load shares nothing happens - the button clicks and does something really quick, then returns to normal and there's no list of shares. I've tried manually entering the share name in the share: field, but that doesn't seem to work either.  Is there a specific syntax I need to be following or is the only way this works if it shows a list of shares?  

 

Is there a way to see the logs for UD for when I try to add a remote share? (sorry very new to unRAID and just starting to get everything figured out!)
 

Thanks!
 

Share this post


Link to post

FYI, the issue was simply that I needed to turn on a setting in Sys Prefs > Sharing > File Sharing > Options. From there, enter your password in the Window File Sharing section.  As soon as I did that, the shares showed up!

 

Share this post


Link to post

Hello there

i have a seagate 4 Tb disk i want to use with UD, i formated it through USB on my windows laptop with EXT4  with partition wizard 10

device is not showing in UD when being plugged.

any advise there on below error msg please?

 

"

Jul 5 07:46:01 Tower kernel: scsi 9:0:0:0: Direct-Access ST4000DM 004-2CV104 PQ: 0 ANSI: 2 CCS
Jul 5 07:46:01 Tower kernel: sd 9:0:0:0: Attached scsi generic sg15 type 0
Jul 5 07:46:01 Tower kernel: sd 9:0:0:0: [sdp] Very big device. Trying to use READ CAPACITY(16).
Jul 5 07:46:01 Tower kernel: sd 9:0:0:0: [sdp] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
Jul 5 07:46:01 Tower kernel: sd 9:0:0:0: [sdp] Write Protect is off
Jul 5 07:46:01 Tower kernel: sd 9:0:0:0: [sdp] Mode Sense: 28 00 00 00
Jul 5 07:46:01 Tower kernel: sd 9:0:0:0: [sdp] No Caching mode page found
Jul 5 07:46:01 Tower kernel: sd 9:0:0:0: [sdp] Assuming drive cache: write through
Jul 5 07:46:01 Tower kernel: sd 9:0:0:0: [sdp] Very big device. Trying to use READ CAPACITY(16).
Jul 5 07:46:01 Tower kernel: sdp: sdp1
Jul 5 07:46:01 Tower kernel: sd 9:0:0:0: [sdp] Very big device. Trying to use READ CAPACITY(16).
Jul 5 07:46:01 Tower kernel: sd 9:0:0:0: [sdp] Attached SCSI disk
Jul 5 07:46:01 Tower unassigned.devices: Adding disk '/dev/sdp1'...
Jul 5 07:46:01 Tower unassigned.devices: No filesystem detected on '/dev/sdp1'.
Jul 5 07:46:01 Tower unassigned.devices: Partition 'ST4000DM004-2CV104_ZFN15573' could not be mounted...
Jul 5 07:46:36 Tower kernel: usb 1-1.1: reset high-speed USB device number 14 using ehci-pci
Jul 5 07:46:36 Tower kernel: usb 1-1.1: device descriptor read/64, error -71
Jul 5 07:46:36 Tower kernel: usb 1-1.1: device descriptor read/64, error -71
Jul 5 07:46:37 Tower kernel: usb 1-1.1: reset high-speed USB device number 14 using ehci-pci
Jul 5 07:46:37 Tower kernel: usb 1-1.1: device descriptor read/64, error -71
Jul 5 07:46:37 Tower kernel: usb 1-1.1: device descriptor read/64, error -71
Jul 5 07:46:37 Tower kernel: usb 1-1.1: reset high-speed USB device number 14 using ehci-pci
Jul 5 07:46:37 Tower kernel: usb 1-1.1: device not accepting address 14, error -71
Jul 5 07:46:37 Tower kernel: usb 1-1.1: reset high-speed USB device number 14 using ehci-pci
Jul 5 07:46:38 Tower kernel: usb 1-1.1: device not accepting address 14, error -71
Jul 5 07:46:38 Tower kernel: usb 1-1.1: USB disconnect, device number 14
Jul 5 07:46:38 Tower kernel: usb 1-1.1: new high-speed USB device number 15 using ehci-pci
Jul 5 07:46:38 Tower kernel: usb 1-1.1: device descriptor read/64, error -71
Jul 5 07:46:38 Tower kernel: usb 1-1.1: device descriptor read/64, error -71
Jul 5 07:46:38 Tower kernel: usb 1-1.1: new high-speed USB device number 16 using ehci-pci
Jul 5 07:46:38 Tower kernel: usb 1-1.1: device descriptor read/64, error -71
Jul 5 07:46:39 Tower kernel: usb 1-1.1: device descriptor read/64, error -71
Jul 5 07:46:39 Tower kernel: usb 1-1-port1: attempt power cycle
Jul 5 07:46:39 Tower kernel: usb 1-1.1: new high-speed USB device number 17 using ehci-pci
Jul 5 07:46:40 Tower kernel: usb 1-1.1: device not accepting address 17, error -71
Jul 5 07:46:40 Tower kernel: usb 1-1.1: new high-speed USB device number 18 using ehci-pci
Jul 5 07:46:40 Tower kernel: usb 1-1.1: device not accepting address 18, error -71
Jul 5 07:46:40 Tower kernel: usb 1-1-port1: unable to enumerate USB device

"

 

Share this post


Link to post
Posted (edited)

I for the life of me can't get UD to mount or connect to a SMB network share on my network, I hit "Search servers in WORKGROUP" select the system the share is on, go down and put in the username and password and hit "Load Share" but nothing ever happens.

I can access the share on other systems in the house, Any Ideas?

 

So update.....

 

I made a new user account on the system I'm working with and gave it admin rights, went to the folder I was wanting to share in Windows and added that new user, gave it full read write access to said folder and now it works..... the button still doesn't show the folders on the system tho.

server-diagnostics-20180705-1900.zip

Edited by AnnabellaRenee87

Share this post


Link to post

 

hello

i have tried to powerdown USB enclosure with seagate in it

UNRAID sees the drive a very short time, even the partition in the UD interface, but strangely disappears few seconds later...

 

"

Jul 6 23:12:33 Tower kernel: usb 1-1.1: new high-speed USB device number 24 using ehci-pci
Jul 6 23:12:33 Tower kernel: usb-storage 1-1.1:1.0: USB Mass Storage device detected
Jul 6 23:12:33 Tower kernel: usb-storage 1-1.1:1.0: Quirks match for vid 152d pid 2329: 8020
Jul 6 23:12:33 Tower kernel: scsi host9: usb-storage 1-1.1:1.0
Jul 6 23:12:34 Tower kernel: scsi 9:0:0:0: Direct-Access ST4000DM 004-2CV104 PQ: 0 ANSI: 2 CCS
Jul 6 23:12:34 Tower kernel: sd 9:0:0:0: Attached scsi generic sg15 type 0
Jul 6 23:12:34 Tower kernel: sd 9:0:0:0: [sdp] Very big device. Trying to use READ CAPACITY(16).
Jul 6 23:12:34 Tower kernel: sd 9:0:0:0: [sdp] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
Jul 6 23:12:34 Tower kernel: sd 9:0:0:0: [sdp] Write Protect is off
Jul 6 23:12:34 Tower kernel: sd 9:0:0:0: [sdp] Mode Sense: 28 00 00 00
Jul 6 23:12:34 Tower kernel: sd 9:0:0:0: [sdp] No Caching mode page found
Jul 6 23:12:34 Tower kernel: sd 9:0:0:0: [sdp] Assuming drive cache: write through
Jul 6 23:12:34 Tower kernel: sd 9:0:0:0: [sdp] Very big device. Trying to use READ CAPACITY(16).
Jul 6 23:12:34 Tower kernel: sdp: sdp1
Jul 6 23:12:34 Tower kernel: sd 9:0:0:0: [sdp] Very big device. Trying to use READ CAPACITY(16).
Jul 6 23:12:34 Tower kernel: sd 9:0:0:0: [sdp] Attached SCSI disk
Jul 6 23:12:34 Tower unassigned.devices: Adding disk '/dev/sdp1'...
Jul 6 23:12:34 Tower unassigned.devices: No filesystem detected on '/dev/sdp1'.
Jul 6 23:12:34 Tower unassigned.devices: Partition 'ST4000DM004-2CV104_ZFN15573' could not be mounted...
Jul 6 23:13:08 Tower kernel: usb 1-1.1: reset high-speed USB device number 24 using ehci-pci
Jul 6 23:13:08 Tower kernel: usb 1-1.1: device descriptor read/64, error -71
Jul 6 23:13:08 Tower kernel: usb 1-1.1: device descriptor read/64, error -71
Jul 6 23:13:08 Tower kernel: usb 1-1.1: reset high-speed USB device number 24 using ehci-pci
Jul 6 23:13:08 Tower kernel: usb 1-1.1: device descriptor read/64, error -71
Jul 6 23:13:08 Tower kernel: usb 1-1.1: device descriptor read/64, error -71
Jul 6 23:13:08 Tower kernel: usb 1-1.1: reset high-speed USB device number 24 using ehci-pci
Jul 6 23:13:09 Tower kernel: usb 1-1.1: device not accepting address 24, error -71
Jul 6 23:13:09 Tower kernel: usb 1-1.1: reset high-speed USB device number 24 using ehci-pci
Jul 6 23:13:09 Tower kernel: usb 1-1.1: device not accepting address 24, error -71
Jul 6 23:13:09 Tower kernel: usb 1-1.1: USB disconnect, device number 24
Jul 6 23:13:09 Tower kernel: usb 1-1.1: new high-speed USB device number 25 using ehci-pci
Jul 6 23:13:09 Tower kernel: usb 1-1.1: device descriptor read/64, error -71
Jul 6 23:13:10 Tower kernel: usb 1-1.1: device descriptor read/64, error -71
Jul 6 23:13:10 Tower kernel: usb 1-1.1: new high-speed USB device number 26 using ehci-pci
Jul 6 23:13:10 Tower kernel: usb 1-1.1: device descriptor read/64, error -71
Jul 6 23:13:10 Tower unassigned.devices: Removing partition '1' from disk '/dev/sdp'.
Jul 6 23:13:10 Tower kernel: usb 1-1.1: device descriptor read/64, error -71
Jul 6 23:13:10 Tower kernel: usb 1-1-port1: attempt power cycle
Jul 6 23:13:11 Tower kernel: usb 1-1.1: new high-speed USB device number 27 using ehci-pci
Jul 6 23:13:11 Tower kernel: usb 1-1.1: device not accepting address 27, error -71
Jul 6 23:13:11 Tower kernel: usb 1-1.1: new high-speed USB device number 28 using ehci-pci
Jul 6 23:13:12 Tower kernel: usb 1-1.1: device not accepting address 28, error -71
Jul 6 23:13:12 Tower kernel: usb 1-1-port1: unable to enumerate USB device

"

=> what is the meaning of 'device descriptor read error & device not accepting address..." ?

any advise please ?

 

Share this post


Link to post
Posted (edited)

Hi,

 

I'm sorry I tried to look for an answer but no luck, I want to use my old hdd as a scrap drive, it formatted ok, I can mount it but there is no way to rename, I don't have "+" icon or all red-X to delete partition described on the front page at all. I'm I doing something wrong? It's not there when the drive is unmounted/mounted/array started/not started. It works but has a very long name I would rather change.

vwpis6.png

 

2ymyv6a.png

 

Thanks

Edited by ChapeL79

Share this post


Link to post
8 hours ago, ChapeL79 said:

I'm sorry I tried to look for an answer but no luck, I want to use my old hdd as a scrap drive, it formatted ok, I can mount it but there is no way to rename, I don't have "+" icon or all red-X to delete partition described on the front page at all.

Unmount the drive first.

Share this post


Link to post
23 hours ago, ChapeL79 said:

Hi,

 

I'm sorry I tried to look for an answer but no luck, I want to use my old hdd as a scrap drive, it formatted ok, I can mount it but there is no way to rename, I don't have "+" icon or all red-X to delete partition described on the front page at all. I'm I doing something wrong? It's not there when the drive is unmounted/mounted/array started/not started. It works but has a very long name I would rather change.

vwpis6.png

 

2ymyv6a.png

 

Thanks

Post your diagnostics.

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


Copyright © 2005-2018 Lime Technology, Inc.
unRAID® is a registered trademark of Lime Technology, Inc.