Joseph

(Solved) Devices won't mount on PCIe USB 3.0 Controller after migration

5 posts in this topic Last Reply

Recommended Posts

Posted (edited)

Hi Guys,

I recently migrated my unRAID to another box. The PCIe USB 3.0 Controller worked in the other box, however after migrating it, attached devices aren't seen by unRAID  under unassigned devices or in the KVM options like it used to. Here's what system devices reveals:

 

[1b73:1100] 02:00.0 USB controller: Fresco Logic FL1100 USB 3.0 Host Controller (rev 10)

 

Here is the complete IOMMU group info.

IOMMU group 12:	[8086:3a40] 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
				[8086:3a48] 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
				[8086:3a4a] 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6
				[1b73:1100] 02:00.0 USB controller: Fresco Logic FL1100 USB 3.0 Host Controller (rev 10)
				[8086:10d3] 03:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
				[8086:10d3] 04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection

Not sure what steps need to be done to get it working. I looked around on the unRAID forums but the only threads I found were for passing through a controller. Any help is much appreciated. Thanks.

Edited by Joseph
Solved

Share this post


Link to post

The diagnostics would be the best to see if a driver is being loaded for it.

Share this post


Link to post
Posted (edited)
22 hours ago, Squid said:

The diagnostics would be the best to see if a driver is being loaded for it.

done... see attached

 

Edited by Joseph

Share this post


Link to post

Driver's being loaded

02:00.0 USB controller [0c03]: Fresco Logic FL1100 USB 3.0 Host Controller [1b73:1100] (rev 10)
	Subsystem: Fresco Logic FL1100 USB 3.0 Host Controller [1b73:1100]
	Kernel driver in use: xhci_hcd

Did you connect the power to the board?

Share this post


Link to post
8 hours ago, Squid said:

Driver's being loaded

Did you connect the power to the board?

 

Ummm..... Doh!  marking issue as solved.

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


Copyright © 2005-2018 Lime Technology, Inc.
unRAID® is a registered trademark of Lime Technology, Inc.