MrLeek

Rate my upgrade

14 posts in this topic Last Reply

Recommended Posts

(This is a cross-post from another part of the forum, just to increase visibility to solicit feedback. I just want to avoid problems with the planned build. Apologies for the spam - this is quite a major upgrade for me)

 

TLDR: I've stopped going around in circles and just about ready to commit to a major upgrade. Please do comment as you see fit!

 

 

Erm...that's about it! Assuming there no major gotchas in here then I'll be taking lots of pictures to try and pimp out my new baby!!

 

 

 

Share this post


Link to post

Looks like a nice pile of shiny bits, should be a fun build. Nothing pop-out as, "Oh dear god, Why?! Why use XYZ!?"  :D

For RAM, you can't go wrong with Kingston --IMO. Really, seems like you've done your homework, certainly for pricing. 

Share this post


Link to post

Great system. Love the gold accents on the board.
Please forgive me if I’m stating the obvious.
Take note that you might lose use of some of your ram slots (make sure you install the ram in the right slots for the corresponding CPU socket) and pcie connections with only one cpu installed. Eg: watch where you will install any GPUs or expansion cards.
Other than this, nice system.

Share this post


Link to post

Thanks both.

 

I ended up with Cruical memory in the end - I just seemed to find it easier to find ram that the MB stated it supported - but Crucial are just as good. Also the Platinum PSU (it was £8 more expensive...and it was in stock!)

 

Insert shiny picture of goodies (chassis turns up on Monday)...wish me luck!

 

IMG_0496.JPG

Share this post


Link to post

Cost basically. I managed to get that mobo at £210 (was £440). The cheapest dual-Xeon server board I found was around £310-320.

 

Its worth mentioning here (this may help others planning their own builds) that pcpartpicker.com assumes that you’re building a workstation and not a server. So it’s fine to pick out the right matching components - and I made good use of it - but it doesn’t show server component options (including cases).

Share this post


Link to post

Ah, clear! Nice price for the Z10PE-D16 WS.

Share this post


Link to post
On 4/20/2018 at 2:45 PM, Jcloud said:

For RAM, you can't go wrong with Kingston --IMO.

I see Crucial in your picture, also good pick for RAM.

Share this post


Link to post
1 hour ago, Jcloud said:

I see Crucial in your picture, also good pick for RAM.

Yeah both are excellent. I looked up the specific ram models that were compatible for the board and found more options for Crucial. No other reason

Edited by MrLeek
  • Upvote 1

Share this post


Link to post

In fact, the only thing I’d love to find other options is the case it’s all going to go in. There’s just not that many options when the mobo is an EEB (not helped that if I did find a good looking tower case I’d want it to be in silver)

Share this post


Link to post

....and dumb question of the day: 

 

If i'm running this mobo with just one CPU, do I keep the CPU slot cap on the unused socket? I assume I do, but sods law says I'll blow the 2nd CPU socket!

Edited by MrLeek

Share this post


Link to post

Not dumb interesting to know! I don’t know either...

Share this post


Link to post
29 minutes ago, MrLeek said:

If i'm running this mobo with just one CPU, do I keep the CPU slot cap on the unused socket?

 

Yes, definitely! Those pins are extremely delicate, and should be protected either by a CPU or the cover that came with the board.

 

The motherboard manual should have a warning about leaving it open.

  • Upvote 1

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


Copyright © 2005-2018 Lime Technology, Inc.
unRAID® is a registered trademark of Lime Technology, Inc.