tr0lll

Unraid 6.3.5 crash when upgrading to 6.4\6.5.0\6.5.3

12 posts in this topic Last Reply

Recommended Posts

Unraid 6.3.5 crash when upgrading to 6.4\6.5.0\6.5.3- 

 

Im running 6.3.5 smoooth and very stable for a long time, and decided to try and upgrade to 6.5.3, unfortunately no mojo.  Then went all the way down step-by-step to 6.4.0 but still no good, so bacl to original 6.3.5(gotta love backups)

 

Even tried a completely blank 6.5.3 unregistrered version, same prob.

 

Mainboard: Supermicro - H8DM8-2

Is this a known nforce problem?

anyone with similar problem thats solved?

 

cheers

 

Share this post


Link to post

Here is snippet of whats coming on screen :

kernel bug at drivers/ata/sata_mv.c:2118

Share this post


Link to post
Posted (edited)

Take a picture of what is on the console screen.  Make sure it is readable...

 

EDIT:  List any plugin cards that you may have installed.  

Edited by Frank1940

Share this post


Link to post
11 hours ago, tr0lll said:

Is this a known nforce problem?

Not AFAIK, but there's a known Supermicro SAT2-MV8 problem, and those use the sata_mv driver.

Share this post


Link to post
On 8/7/2018 at 9:58 PM, Frank1940 said:

Take a picture of what is on the console screen.  Make sure it is readable...

 

EDIT:  List any plugin cards that you may have installed.  

03:04.0 "SCSI storage controller" "Marvell Technology Group Ltd." "MV88SX6081 8-port SATA II PCI-X Controller" -r09 "Marvell Technology Group Ltd." "MV88SX6081 8-port SATA II PCI-X Controller"
03:06.0 "SCSI storage controller" "Marvell Technology Group Ltd." "MV88SX6081 8-port SATA II PCI-X Controller" -r09 "Marvell Technology Group Ltd." "MV88SX6081 8-port SATA II PCI-X Controller"
04:06.0 "SCSI storage controller" "Marvell Technology Group Ltd." "MV88SX6081 8-port SATA II PCI-X Controller" -r09 "Marvell Technology Group Ltd." "MV88SX6081 8-port SATA II PCI-X Controller"
 

Share this post


Link to post
On 8/7/2018 at 9:58 PM, Frank1940 said:

Take a picture of what is on the console screen.  Make sure it is readable...

 

EDIT:  List any plugin cards that you may have installed.  

03:04.0 "SCSI storage controller" "Marvell Technology Group Ltd." "MV88SX6081 8-port SATA II PCI-X Controller" -r09 "Marvell Technology Group Ltd." "MV88SX6081 8-port SATA II PCI-X Controller"
03:06.0 "SCSI storage controller" "Marvell Technology Group Ltd." "MV88SX6081 8-port SATA II PCI-X Controller" -r09 "Marvell Technology Group Ltd." "MV88SX6081 8-port SATA II PCI-X Controller"
04:06.0 "SCSI storage controller" "Marvell Technology Group Ltd." "MV88SX6081 8-port SATA II PCI-X Controller" -r09 "Marvell Technology Group Ltd." "MV88SX6081 8-port SATA II PCI-X Controller"
 

DSC_1979.JPG

Share this post


Link to post

This driver seems to be an issue with unRAID over a period of several years.  You can read about these instances by googling   unraid  sata_mv.     Apparently, it works with certain Linux kernel releases and not with others.  Someone else may be able to jump in at this point and provide some guidance.  

Share this post


Link to post

You need to replace the SAT2_MV8 controllers, they have issues with newer kernels and also with newer devices, i.e., they don't work with some recent disks/SSDs.

Share this post


Link to post

Well that's just too bad, gotta wait for next release with newer kernel - hopefully this is a minor fix 😂

 

Is there any place to highlight this issue to the development team ?

Share this post


Link to post

You can try in the 'Bug Reports' sub-section (the next one after this one).  Don't get your hopes up as I seem to recall that it may be partially a hardware problem with the controller chip.

Share this post


Link to post
16 minutes ago, tr0lll said:

Is there any place to highlight this issue to the development team ?

 

I googled around a little and couldn't find an answer to who is maintaining the sata_mv driver. It's definitely NOT limetech.

Share this post


Link to post

Here is snippet of whats coming on screen :

kernel bug at drivers/ata/sata_mv.c:2118

21 hours ago, jonathanm said:

 

I googled around a little and couldn't find an answer to who is maintaining the sata_mv driver. It's definitely NOT limetech.

 

So this is from Kernel, then i presume this driver is loaded as module, and can be replaced with a compiled driver from scratch? 

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


Copyright © 2005-2018 Lime Technology, Inc.
unRAID® is a registered trademark of Lime Technology, Inc.