prostuff1

Moderators
  • Content count

    6321
  • Joined

  • Last visited

Community Reputation

1 Neutral

About prostuff1

  • Rank
    Advanced Member

Converted

  • Gender
    Undisclosed
  • URL
    http://www.greenleaf-technology.com
  • Personal Text
    Greenleaf Technology
  1. Minio + duplicati (Crashplan Home replacement)

    I have not had a chance to play with getting the docker up and running on my unRAID machine. I plan to play with it sometime this week and will be sure to do a writeup after I get it going.
  2. best offsite backup solution atm

    Duplicati docker backing up to an Amazon S3 account. That is likely what I will be doing for all my computers for an "offsite backup" replacement (had Crashplan Home). My next step is a Minio serice running on my server and then backing up via Duplicati to that to get full backups in 2 different locations.
  3. I just posted a request on the linuxserver.io forums (you can find it here https://forum.linuxserver.io/thread-585.html) about getting a Minio docker created. I found a blog article discussing the use on Minio and duplicati to mimic Crashplan Home. I will likely be combining duplicati with an Amazon S3 service to get the cloud backup portion taken care of; but that does not cover the Crashplan server I had running locally and was also backing up to. I believe I can get Minio and Duplicati to work together so that it will function the same or very close to how my local crashplan server did. I found a blog article talking about using these 2 apps together here (http://blog.quindorian.org/2017/08/diy-cloud-backup-replacing-crashplan-home-family-diy-style.html/) Thoughts and comments welcome.
  4. Would you be willing to elaborate on that a little bit more?
  5. Install the "Command Line Tool" through Community Applications and try it out instead.
  6. I want to try unraid in VMware

    Back in the day when i was running unRAID under ESXi I was using Plop to "load" the flash drive so ESXi could use it. Honeslty have not done and ESXi stuff in a while so not sure if that is still needed/used.
  7. Thinking of moving to unRAID

    I would also consider upgrading the CPU to at least a E3-1230 or better. The 1220 does NOT have hyperthreading. I would not bother with with VM1, VM2, or VM3. Get a big SSD and set it as a cache drive in unRAID. Use that as the VM location and go about creating your editing VM there. All the apps you want/need to run can be done via docker and take up less space then full blown VM's
  8. Longest server uptime for unRAID

    My dedicated crashplan backup server that runs unRAID is usually up for quite a while at a time as I do not usually bother updating with every unRAID release. My main server was up for nearly a year and a half at one point. I skipped one whole release of unRAID on my main server, mostly because it was a "if it aint broke don't fix it"
  9. Yeah, I am going to have to start looking at alternatives now. I am currently looking into https://www.duplicati.com/ and https://www.arqbackup.com/. Kind of want to see what a Duplicati docker would be like and if someone could get it up and running. I could just pay for an unlimited cloud storage at amazon, google, microsoft, etc on a per month and then send all the computers that i was sending to crashplan there. If anyone out there has played with either of the above mentioned please chime in on your opinions.
  10. No internet = no Unraid ?

    The linked post above is from Limetech so you should be fairly confident in the information provided there. There is no 100% gaurentee that it will not change in the future but for now everything works as you would like. Limetech has been pretty understanding about the users needs/wants/desires.
  11. [CONTAINER] CrashPlan & CrashPlan-Desktop

    Ditto for me as well. I rarely restart my dedicated Crashplan box so it is not a huge deal for me but it is a little annoying.
  12. PCIe USB 3.0 controller card passthrough

    Just a quick thanks and point in the right direction. I was able to get the USB 3.0 card stubbed out and passed into the Windows 7 VM. Once there a driver installed made it show right up and work without an issue. Thanks!!
  13. PCIe USB 3.0 controller card passthrough

    Sounds good and thanks for the point in the right direction. When I get off of work I will take a stab at it and let you know how it goes.
  14. Hello all, Looking for some guidance and help in getting a PCIe USB 3.0 card passed through to a Windows 7 VM. The card in question is this bad boy made my mediasonic. Bus 1 --> 0000:00:1a.0 (IOMMU group 4) Bus 001 Device 004: ID 13fe:3123 Kingston Technology Company Inc. Verbatim STORE N GO 4GB Bus 001 Device 003: ID 0557:2221 ATEN International Co., Ltd Winbond Hermon Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 2 --> 0000:00:1d.0 (IOMMU group Bus 002 Device 003: ID 1bcf:0c31 Sunplus Innovation Technology Inc. SPIF30x Serial-ATA bridge Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 3 --> 0000:03:00.0 (IOMMU group 2) Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 4 --> 0000:03:00.0 (IOMMU group 2) Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub IOMMU group 0 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/Ivy Bridge DRAM Controller [8086:0158] (rev 09) IOMMU group 1 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) 00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0155] (rev 09) [RESET] 01:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (re v 03) [RESET] 02:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (re v 02) IOMMU group 2 00:06.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:015d] (rev 09) [RESET] 03:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller [1912:0015] (rev 02) IOMMU group 3 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:16.1 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #2 [8086:1c3b] (rev 04) IOMMU group 4 [RESET] 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 0 5) IOMMU group 5 [RESET] 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) IOMMU group 6 [RESET] 00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [8086:1c1c] (rev b5) IOMMU group 7 [RESET] 00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5) IOMMU group 8 [RESET] 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 0 5) IOMMU group 9 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5) [RESET] 07:03.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 [102b:0532] (rev 0a) IOMMU group 10 00:1f.0 ISA bridge [0601]: Intel Corporation C204 Chipset Family LPC Controller [8086:1c54] (rev 05) [RESET] 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) IOMMU group 11 [RESET] 05:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3] IOMMU group 12 [RESET] 06:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3] Window VM XML <domain type='kvm'> <name>Windows 7</name> <uuid>f9232898-ac1a-b0ab-9417-3d980469ad88</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 7" icon="windows7.png" os="windows7"/> </metadata> <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>2</vcpu> <cputune> <vcpupin vcpu='0' cpuset='3'/> <vcpupin vcpu='1' cpuset='7'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-2.5'>hvm</type> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor id='none'/> </hyperv> </features> <cpu mode='host-passthrough'> <topology sockets='1' cores='1' threads='2'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/vms/Windows 7/vdisk1.img'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'/> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:c3:73:f5'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <source mode='connect'/> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' websocket='-1' listen='0.0.0.0' keymap='en-us'> <listen type='address' address='0.0.0.0'/> </graphics> <video> <model type='cirrus' vram='16384' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x1bcf'/> <product id='0x0c31'/> </source> </hostdev> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </memballoon> </devices> </domain>
  15. unRAID Server Version 6.2.4 Available

    I am running 6.2.4 on my server and I have no problem accessing my shares on 2 libreelec boxes. No windows 10 on the network to test with so can't comment on that part. The Libreelec boxes have no problem what so ever.

Copyright © 2005-2018 Lime Technology, Inc.
unRAID® is a registered trademark of Lime Technology, Inc.